@proceedings {460, title = {Preliminary Data Analysis of PSWS Magnetometer Data}, year = {2021}, month = {03/2021}, publisher = {HamSCI}, address = {Scranton, PA (Virtual)}, abstract = {

We report on the preliminary analysis of data obtained from newly developed magnetometers as part of HamSCI Personal Space Weather Station (PSWS) project. These systems are designed to provide quantitative and qualitative measurements of the geospace environment from the ground for both scientific and operational purposes at a cost that will allow for crowd-sourced data contributions. The PSWS magnetometers employ low-cost, commercial off-the-shelf, magneto-inductive sensor technology to record three-axis magnetic field variations with an adequate field resolution of ~10 nT at a 1 Hz sample rate. Data from the PSWS network will combine these magnetometer measurements with high frequency (HF, 3-30 MHz) radio observations to monitor large-scale current systems and ionospheric disturbances due to drivers from both space and the atmosphere. A densely-spaced magnetometer array, once established, will demonstrate their space weather monitoring capability in unprecedented spatial extent. Magnetic field data obtained by the magnetometers installed at three locations across the US are presented and compared with the existing magnetometers nearby.\ 

}, author = {Hyomin Kim and Julius Madey and David M. Witten II and David Larsen and Scott H. Cowling and Nathaniel A. Frissell and James Weygand} } @proceedings {500, title = {PSWS Ground Magnetometer Hardware}, year = {2021}, month = {03/2021}, publisher = {HamSCI}, address = {Scranton, PA (Virtual)}, abstract = {

The path from candidate device for the magnetometer function of the PSWS to practical affordable working 24/7 data collection installations based on the low cost and readily available PNI RM3100 magneto-inductive sensor is discussed.\  Initial support board design using i2c bus connection to the host Odroid or Raspberry Pi class microprocessors with support for remote extension of the sensor to at least 100 feet with common CAT5 networking cable will be described as well as the accompanying test and logging software.\  Details of initial testing which revealed the need for temperature stabilization of the RM3100, verified remote operation to at least 500 feet, the subsequent design of an in-ground sensor housing made from common PVC water pipe and fittings and refinement of the microprocessor adapter board and remote board will be presented.

}, author = {Julius Madey and David Witten, II and Hyomin Kim and David Larsen and Scott H. Cowling and Nathaniel A. Frissell} } @conference {315, title = {PSWS Science Requirements Panel Discussion (Panel)}, booktitle = {HamSCI Workshop 2019}, year = {2019}, month = {03/2019}, publisher = {HamSCI}, organization = {HamSCI}, address = {Cleveland, OH}, abstract = {

Moderator: Ward Silver, N0AX

  1. Phil Erickson, W1PJE, MIT Haystack Observatory, Radio, Ionospheric, \& Magnetospheric Science
  2. Nathaniel Frissell, W2NAF, NJIT, Radio, Ionospheric, \& Magnetospheric Science
  3. Hyomin Kim, KD2MCR, NJIT, Magnetospheric Physics
  4. Bill Liles, NQ6Z, VLF Science
  5. John Ackermann, N8UR, TAPR, Radio Engineering
  6. Scotty Cowling, WA2DFI, TAPR, Radio Engineering
  7. Tom McDermott, N5EG, TAPR, Radio Engineering
}, author = {John Ackermann and Scotty Cowling and Philip J. Erickson and Nathaniel A. Frissell and Hyomin Kim and William Liles and Thomas McDermott and Ward Silver} }